|
|
| Строка 1: |
Строка 1: |
| − | Learning building your own PERSONAL COMPUTER from scratch can be a very difficult task if you know nothing about computer systems. However once you discover ways to do it as well as understand exactly how to handle it, it actually will become quite enjoyable having the ability to easily strip down and build-up old or brand new PC's. I would prefer to take this chance to lay out the essential components of your personal computer and help you discover ways to build a computer from scratch.
| + | Content removed |
| − | | |
| − | PC Components
| |
| − | | |
| − | The most common pc components that you need to have are your mouse, keyboard, hard drive, floppy drive, ram chips, sound and artwork card, power supply, motherboard and monitor. I'm assuming that you know what each one of these components look similar to. If you are usually unsure about several components just search for pictures of them on the net and you will dsicover what they tend to be.
| |
| − | | |
| − | Connection Process
| |
| − | | |
| − | Firstly you have to use the mother board as well as the mother board growing plate. Firstly, gently screw your motherboard onto mom board plate with all the notches or screws which were provided with the particular package or package. Once this is done you will have to insert the COMPUTER (Central Control Unit) in to its slot for the motherboard. Sometimes these COMPUTER sockets have levers which you have to gently release to open it up so pay attention to that. Gently slide the CPU into its socket making certain the pins around the backside slide within correctly otherwise it could get damaged. You can today clip the lever back to place and make certain it is safe.
| |
| − | | |
| − | Now you must attach the heatsink on the CPU chip. You might see that the CPU already incorporates the heatsink/fan attached to it then you can read additional. Now you should connect the tiny cable from the particular heatsink fan for the corresponding socket for the motherboard to give it power.
| |
| − | | |
| − | The next step is to place the ram chips within their respective slots which can be long and thin. Once this continues to be done you may possibly mount the motherboard installation plate onto along side it of the laptop or computer and screw/slip it in so that it is attached properly.
| |
| − | | |
| − | The power supply may be the next component to cope with. The power supply area is generally located at the back of the pc case and is also indicated with screw holes that are unoccupied. Just try and also maneuver it around to fit with the corresponding holes before you decide to screw it in. The power supply has a main system connector which gets connected to the power slot around the motherboard, a floppy energy connector which gets attached to the floppy drive as well as a few standard peripheral power connectors (red-colored, yellow and black wires) which get attached to your hard hard disks and cd roms. You will need to mount the hard drives, cd roms and floppy drives along with connect them along with those connectors ensuring the red insert on each power connector is pointed inwards towards the motherboard. I'll explain exactly why below.
| |
| − | | |
| − | Right, now we move onto the 2 ports on the particular motherboard called the principal and secondary IDE Plug-ins. You will notice them when they are rectangular together with brackets around these. these ports are used to connect the hard drives and cd roms. The cables that get connected to these two plug-ins are 40 pin IDE cables using have 3 cable connections on each cable. Make sure the longest area of the cable is attached to the IDE ports. You need to connect the primary IDE cable in the motherboard to the particular hard drive(s) plus the secondary IDE port is employed to connect your DVD Roms to your motherboard. When you connect these IDE cables in the cdroms and hard drives make certain that the red wire strip is side by side with the red-colored wire strip of the power connectors which are connected to people devices. Consult your manual when you have one to see how to use the different jumpers to switch between master along with salve drives in each port. This will enable you to choose which pushes are primary and secondary.
| |
| − | | |
| − | Now that the electricity supply is attached to the motherboard plus the various other components you will have to plug graphics and sound card inside their slots. Once this is done be sure you connect the top panel connectors to the corresponding LED lights which means your lights will show up when the personal computer boots. Failure to do so will result in non function with the system.
| |
| − | | |
| − | Lastly make sure everything is linked properly. This includes the actual external mouse, keyboard, monitor cable and also power cables so your computer will start and function properly. If all is done well then it should be okay.[http://kelvinreviews12.wordpress.com/ read more]
| |
