|
|
| Строка 1: |
Строка 1: |
| − | Learning how to construct your own COMPUTER from scratch can be a very difficult task find out nothing about computer systems. However once you learn to do it and also understand exactly what direction to go, it actually turns into quite enjoyable having the ability to easily strip down and increase old or brand new PC's. I would want to take this possiblity to lay out the essential components of a computer and help you discover ways to build a personal computer from scratch.
| + | Content removed |
| − | | |
| − | PC Components
| |
| − | | |
| − | The most frequent pc components that you simply must have are the actual mouse, keyboard, hard drive, floppy drive, ram chips, sound and images card, power supply, motherboard and monitor. I'm assuming that you will know what these components look like. If you are generally unsure about some components just look for pictures of them on the internet and you will dsicover what they are usually.
| |
| − | | |
| − | Connection Process
| |
| − | | |
| − | Firstly you have to work with the mother board and the mother board mounting plate. Firstly, gently screw the actual motherboard onto the mother board plate using the notches or screws which were provided with your package or system. Once this is done you need to insert the PC (Central Running Unit) directly into its slot on the motherboard. Sometimes these PROCESSOR sockets have levers which you need to gently release in order to open it up so pay attention to that. Gently slide the CPU into its socket ensuring that the pins for the backside slide throughout correctly otherwise it could get damaged. You can right now clip the lever back to place and be sure it is secure.
| |
| − | | |
| − | Now you will need to attach the heatsink for the CPU chip. You might realize that the CPU already includes the heatsink/fan attached with it then you definitely can read further. Now you should connect the little cable from the actual heatsink fan on the corresponding socket on the motherboard to supply it power.
| |
| − | | |
| − | The next step is to place the ram chips into their respective slots that happen to be long and thin. Once this continues to be done you may well mount the motherboard increasing plate onto the medial side of the personal computer and screw/slip it in in order that it is attached effectively.
| |
| − | | |
| − | The power supply could be the next component to manage. The power supply area is often located behind the pc case which is indicated with screw holes which are unoccupied. Just try along with maneuver it around to match with the corresponding holes before you screw it in. The power supply has a main system connector which gets plugged into the power slot on the motherboard, a floppy energy connector which gets attached to the floppy drive and a few standard peripheral energy connectors (reddish, yellow and dark-colored wires) which get plugged into your hard hard disks and cd roms. You will ought to mount the computer drives, cd roms along with floppy drives and connect them together with those connectors ensuring the red line on each electrical power connector is pointed inwards for the motherboard. I'll explain the reason why below.
| |
| − | | |
| − | Right, now we move onto the 2 ports on your motherboard called the key and secondary IDE Locations. You will notice them when they are rectangular with brackets around these. these ports are utilized to connect the hard disk drives and cd roms. The cables that get connected to these two ports are 40 flag IDE cables with have 3 internet connections on each cable television. Make sure the longest perhaps the cable is attached to the IDE slots. You need to plug the primary IDE cable from the motherboard to the hard drive(s) plus the secondary IDE port can be used to connect your own DVD Roms for a motherboard. When you plug these IDE cables in the cdroms and hard drives ensure that the red cable strip is hand and hand with the crimson wire strip from the power connectors that happen to be connected to those people devices. Consult your manual when you have one to learn how to use the different jumpers to change between master and also salve drives on each port. This will enable you to choose which devices are primary and secondary.
| |
| − | | |
| − | Now that the ability supply is associated with the motherboard and the various other components you will need to plug graphics along with sound card into their slots. Once this is done be sure you connect the the front panel connectors to the corresponding LED lights so your lights will make an appearance when the computer boots. Failure to do so will result in non function with the system.
| |
| − | | |
| − | Lastly make positive everything is linked properly. This includes your external mouse, keyboard, monitor cable and also power cables so that the computer will turn on and function effectively. If all is conducted well then it ought to be okay.[http://digg.com/newsbar/topnews/is_it_cheaper_to_build_your_own_computer read more]
| |
