|
|
| (не показана 1 промежуточная версия этого же участника) |
| Строка 1: |
Строка 1: |
| − | Learning building your own COMPUTER from scratch can be a very difficult task once you learn nothing about personal computers. However once you learn to do it and also understand exactly how to proceed, it actually will become quite enjoyable having the ability to easily strip down and build up old or brand new PC's. I would like to take this opportunity to lay out principle components of a computer and help you figure out how to build a personal computer from scratch.
| + | Content removed |
| − | | |
| − | PC Components
| |
| − | | |
| − | The most frequent pc components that you will have to have are the actual mouse, keyboard, hard drive, floppy drive, ram chips, sound and artwork card, power supply, motherboard and monitor. I'm assuming that you know what each of these components look just like. If you tend to be unsure about a number of components just hunt for pictures of them on the net and you might find what they are usually.
| |
| − | | |
| − | Connection Process
| |
| − | | |
| − | Firstly you have to utilize the mother board and the mother board installation plate. Firstly, gently screw the actual motherboard onto the mother board plate while using notches or screws which have been provided with your package or equipment. Once this is done you simply must insert the PC (Central Running Unit) in to its slot around the motherboard. Sometimes these CPU sockets have levers which you should gently release in order to open it up so become aware of that. Gently slide your CPU into its socket ensuring the pins on the backside slide in correctly otherwise it might get damaged. You can today clip the lever back into place and make certain it is safe.
| |
| − | | |
| − | Now you will have to attach the heatsink to the CPU chip. You might see that the CPU already includes the heatsink/fan that come with it then you definitely can read additional. Now you should connect small cable from your heatsink fan for the corresponding socket around the motherboard to supply it power.
| |
| − | | |
| − | The next step is to place the ram chips within their respective slots which can be long and slender. Once this continues to be done you may mount the motherboard installation plate onto along side it of the personal computer and screw/slip it in so that it is attached appropriately.
| |
| − | | |
| − | The power supply may be the next component to deal with. The power supply area is often located at the back of the pc case which is indicated with screw holes which are unoccupied. Just try along with maneuver it around to adjust to with the corresponding holes before you decide to screw it throughout. The power supply features a main system connector which gets attached to the power slot on the motherboard, a floppy energy connector which gets attached to the floppy drive or a few standard peripheral power connectors (reddish, yellow and dark wires) which get attached to your hard devices and cd roms. You will ought to mount the hard disks, cd roms along with floppy drives as well as connect them together with those connectors being sure that the red line on each strength connector is pointed inwards towards motherboard. I'll explain exactly why below.
| |
| − | | |
| − | Right, now we move onto both the ports on the motherboard called the main and secondary IDE Plug-ins. You will notice them as they are rectangular together with brackets around these people. these ports are widely-used to connect the hard drives and cd roms. The cables that get attached to these two plug-ins are 40 green IDE cables together with have 3 cable connections on each wire. Make sure the longest area of the cable is connected to the IDE ports. You need to get in touch the primary IDE cable in the motherboard to your hard drive(s) and the secondary IDE port is utilized to connect the DVD Roms for your motherboard. When you plug these IDE cables into the cdroms and hard drives ensure that the red line strip is side by side with the red-colored wire strip with the power connectors which are connected to those people devices. Consult your manual for those who have one to learn how to use the different jumpers to change between master and salve drives about each port. This will allow you to choose which hard disks are primary along with secondary.
| |
| − | | |
| − | Now that the power supply is connected to the motherboard as well as the various other components you simply must plug graphics and sound card to their slots. Once this is done make sure to connect the the front panel connectors for the corresponding LED lights which means that your lights will show up when the pc boots. Failure to do so can lead to non function with the system.
| |
| − | | |
| − | Lastly make sure everything is attached properly. This includes the external mouse, keyboard, monitor cable and power cables so the computer will switch on and function properly. If all is done well then it ought to be okay.[http://kelvinreviews.inube.com/blog/1312669/techniques-to-build-your-own-computer-system/ read more]
| |
