|
|
| (не показана 1 промежуточная версия этого же участника) |
| Строка 1: |
Строка 1: |
| − | Learning building your own PC from scratch can be quite a very difficult task if you know nothing about computer systems. However once you learn to do it as well as understand exactly how to proceed, it actually turns into quite enjoyable having the ability to easily strip down and develop old or new PC's. I would like to take this opportunity to lay out the basic components of your personal computer and help you learn how to build a laptop or computer from scratch.
| + | Content removed |
| − | | |
| − | PC Components
| |
| − | | |
| − | The most typical pc components that you need to have are the mouse, keyboard, hard drive, floppy drive, ram chips, sound and artwork card, power supply, motherboard and keep an eye on. I'm assuming that you know what these components look such as. If you are generally unsure about a few components just hunt for pictures of them on the web and you will dsicover what they are usually.
| |
| − | | |
| − | Connection Process
| |
| − | | |
| − | Firstly you have to use the mother board and also the mother board mounting plate. Firstly, gently screw the motherboard onto mom board plate while using notches or screws that have been provided with the particular package or kit. Once this is done you will need to insert the CPU (Central Running Unit) directly into its slot about the motherboard. Sometimes these PC sockets have levers which you have to gently release in order to open it up so observe that. Gently slide the particular CPU into its socket making sure the pins about the backside slide within correctly otherwise it could get damaged. You can currently clip the lever back to place and ensure it is safe.
| |
| − | | |
| − | Now you will have to attach the heatsink towards the CPU chip. You might see that the CPU already includes the heatsink/fan mounted on it then you definitely can read more. Now you should connect the small cable from the particular heatsink fan on the corresponding socket on the motherboard to provide it power.
| |
| − | | |
| − | The next step would be to place the ram chips within their respective slots that happen to be long and slender. Once this has been done you might mount the motherboard mounting plate onto the side of the pc and screw/slip it in in order that it is attached effectively.
| |
| − | | |
| − | The power supply will be the next component to manage. The power supply area is normally located behind the pc case and it is indicated with screw holes which can be unoccupied. Just try as well as maneuver it around to suit with the corresponding holes prior to deciding to screw it throughout. The power supply includes a main system connector which gets plugged into the power slot on the motherboard, a floppy strength connector which gets connected to the floppy drive or a few standard peripheral power connectors (red, yellow and dark-colored wires) which get plugged into your hard hard disks and cd roms. You will ought to mount the hard disk drives, cd roms and also floppy drives and also connect them together with those connectors making sure that the red cable on each energy connector is pointed inwards for the motherboard. I'll explain precisely why below.
| |
| − | | |
| − | Right, now we move onto both ports on the particular motherboard called the primary and secondary IDE Locations. You will notice them while they are rectangular with brackets around all of them. these ports are employed to connect the hard disk drives and cd roms. The cables that get connected to these two plug-ins are 40 flag IDE cables using have 3 cable connections on each cable tv. Make sure the longest area of the cable is attached to the IDE slots. You need for connecting the primary IDE cable from the motherboard to the actual hard drive(s) plus the secondary IDE port can be used to connect the DVD Roms in your motherboard. When you plug these IDE cables in the cdroms and hard drives be sure that the red insert strip is side by side with the red wire strip from the power connectors that are connected to people devices. Consult your manual should you have one to learn how to use the different jumpers to switch between master along with salve drives in each port. This will enable you to choose which pushes are primary and also secondary.
| |
| − | | |
| − | Now that the energy supply is associated with the motherboard and the various other components you will have to plug graphics and also sound card into their slots. Once this is done be sure you connect the front panel connectors on the corresponding LED lights which means your lights will make an appearance when the pc boots. Failure to do so can lead to non function with the system.
| |
| − | | |
| − | Lastly make certain everything is related properly. This includes your external mouse, keyboard, monitor cable and also power cables so that the computer will start and function effectively. If all is done well then it ought to be okay.[http://www.squidoo.com/tips-for-how-to-build-your-own-computer building computer]
| |
