Материал из Wiki Mininuniver
Перейти к навигацииПерейти к поиску
|
|
| Строка 1: |
Строка 1: |
| − | For standard epoxy and polish fiber optic connectors, the termination process normally includes 7 steps (up to 30 minutes) which are:<br><br>1. Strip the optical fiber to expose the [http://www.calarttech.com/ relevant webpage] 125um (140um or other sizes depending on your fiber) fiber cladding<br><br>two. Clean the exposed bare fiber with isopropyl alcohol and lint-free wipes<br><br>three. Insert the bare fiber into the connector center hole until ...<br><br>The termination process for business standard epoxy and polish fiber optic connectors.<br><br>For standard epoxy and polish fiber optic connectors, the termination process generally consists of 7 actions (up to 30 minutes) which are:<br><br>1. Strip the optical fiber to expose the 125um (140um or other sizes based on your fiber) fiber cladding<br><br>2. Clean the exposed bare fiber with isopropyl alcohol and lint-totally free wipes<br><br>three. Insert the bare fiber into the connector center hole until the fiber stops<br><br>four. Inject fiber optic epoxy with a syringe dispenser into the connector physique<br><br>5. Remedy the fiber optic epoxy with high temperature which could be 85C, 100C or even 120C based on the sort of fiber optic epoxy(you need to have a particular connector epoxy curing oven for this purpose)<br><br>6. Scribe the fiber protruding from the tip of the fiber connector<br><br>7. Polish the connector tip with lapping films either by hand or specialized fiber optic connector polishing machine(specially for single mode fiber connectors)<br><br>So you see that the process for terminating optical fiber is a complex procedure. It takes time and practice and only extremely educated fiber optic technicians can do the operate properly with high yield ratio.<br><br>But [http://www.calarttech.com/microsoft-certified/mcsa-bootcamp mcse course] fiber optic contractor installers for premise networks typically do not have the luxury of time or the high-priced tools for this type of termination. And that is when speedy termination fiber optic connectors come into handy.<br><br>Speedy termination fiber optic connectors are specially developed for rapidly termination with out lots of expertise needed. A fiber optic contractor installer can do a quick termination within 2~3 minutes.<br><br>There are a lot of different designs but the typical one such as Corning Siecor Unicam connector is like this:<br><br>The Unicam connector is pre-polished in factory with a fiber stub hidden inside the body of the connector. The installer then only wants 5 steps to total a Unicam connector termination with industry common high quality.<br><br>1. Strip the optical fiber to expose the 125um fiber cladding<br><br>2. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes<br><br>three. Cleave the fiber with a cleaver<br><br>4. Insert the fiber into the Unicam connector until it stops<br><br>five. Crimp the fiber onto the Unicam connector with a fiber connector crimper tool<br><br>A fiber optic contractor installer can make [http://www.calarttech.com/computer-security/cissp cissp training] a Unicam connector termination within two minutes. Compared to the standard epoxy approach (up to 30 minutes), that is 87% time saved.<br><br>Unicam connectors provide equivalent insertion loss overall performance as a standard epoxy and polish connector. Unicam connectors also meet or exceed the mechanical and optical efficiency specified by EIA/TIA 568.B.<br><br>Fiber Optic For Sale Co stocks all sorts of Corning Siecor Unicam connectors which includes Unicam ST, TKT Unicam CTS SF, Corning TKT Unicam, Unicam LC, Unicam SC, Unicam tool kit and TKT Unicam Elite.
| + | Content removed |
Версия 02:50, 27 декабря 2025
